Skip to main content
Compatible devices: Only SumUp Solo and SumUp Solo Printer support API mode. SumUp Air, 3G, Lite and older models are NOT compatible and cannot be used with POSBridge.
About 1–2 minutes
1

Power on the terminal

Power on your SumUp Solo. Recommendation: at least 20% battery. The terminal must be fully booted (home screen visible).
2

Swipe down → Connections

Swipe down from the top → Connections.
3

Select Cloud API

Select Cloud API (sometimes labelled API).
4

Show the pairing code

Tap Connect — the terminal shows a pairing code.
5

Enter the code later in the app

Type the pairing code from SumUp later in the app. If it expires, get a new code via Connections → Cloud API.
Solo and iPad need internet. They do not have to be on the same Wi-Fi.
Swipe down from the top → Connections → Cloud API.
Swipe down → Connections. The item is labelled Cloud API or just API. There is no Settings → Advanced path.
Have the PosBridge Terminals page already open. If it expires: on the terminal open Connections → Cloud API again and get a new code.